Featured Commercial Swing Hangers
9 products
Hangers connect the swing chain to the frame of the swing set, allowing the swing to move. Different swing hangers are designed for different size top rails. These hangers clamp around the top rail and tighten to hold the swings firmly in place. The piece that the chain attaches to is able to move back and forth, creating the swinging motion. Other types of hangers are flat and bolt directly to the underside of the top rail. These hangers are heavy duty and designed to withstand years of use.
Browse Hangers Products
PlaygroundEquipment.com
Swing Hanger with Shackle Pendulum
Child Works
Shackle Pendulum Replacement
Jensen
Jensen Non Wrap Swing Hanger - Fits 2-3/8-inch Top Rail
Jensen
Jensen Non Wrap Swing Hanger - Fits 3-1/2-inch Top Rail
Child Works
Shackle Modern Swing Hanger
Child Works
Standard Modern Swing Hanger
Child Works
Standard Pendulum Replacement
Child Works
Swing Hanger
Child Works
Two Hole Flat Ductile Iron Swing Hanger
Frequently Asked Questions
What makes heavy duty swing hangers different from residential hangers?
Heavy duty swing hangers use thicker steel construction and higher weight capacities to handle constant commercial use. Commercial hangers typically support 200-300 pounds per swing versus 100-150 pounds for residential models. The bearing systems are sealed and built for 8-12 hours of daily use without maintenance.
How do I determine which swing hanger fits my top rail size?
Measure your top rail diameter first — most commercial swing sets use 2-3/8 inch, 3-1/2 inch, or 4-1/2 inch diameter rails. Clamp-on hangers adjust to fit standard pipe sizes, while bolt-through hangers require exact measurements and pre-drilled holes. Your swing set manufacturer specifications will list the required hanger type.
What is the weight capacity difference between clamp-on and bolt-through hangers?
Bolt-through hangers typically handle 300+ pounds per swing because they distribute load across the entire top rail thickness. Clamp-on heavy duty swing hangers usually support 200-250 pounds per swing, relying on clamp pressure around the rail circumference. Bolt-through installation requires more labor but provides higher capacity.